Thakar Enterprises

Bibvewadi, Pune, Maharashtra

GST No. 27AHEPT7977L1ZB

Send Email
0804861352570% Response Rate
Search

Home » Our Products » Theory Of Machines Laboratory Setups


Theory Of Machines Laboratory Setups

Prominent & Leading Manufacturer from Pune, we offer coriollis component of acceleration, generation of involute gear tooth profile, static dynamic balancing apparatus, motorized gyroscope apparatus, motorized governor apparatus and whirling of shaft apparatus.

Coriollis Component Of Acceleration

REQUEST CALLBACK

Coriollis Component Of Acceleration
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 90,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical
PhaseSingle Phase

This set up is designed to study coriollis component of Acceleration of a slider crank Mechanism. The apparatus uses hydraulic analogy to represent the rotating slider. It consists of a rotating block with two arms in opposite direction. These tubes can be rotated at various speeds by using a swinging field motor, which also acts as a dynamometer to measure torque applied to rotating tubes. A Perspex window on top cover helps to visualize the process. Rotameter is used to measure water flow rate through tubes. Water is circulated by small monoblaock pump.

Specifications:

1.Main Tank with fiberglass lining.
2.Rotating Arms 9/6 mm dia, 300 mm long.
3.Motor – Swinging field, D.C., 0.5 HP.
4.Rotameter
5.Monoblock Pump
6.Control Panel comprising of –
(i) Speed Control Unit.
(ii) Speed Indicator.
(iii) Necessary switches.
7.Rigid support frame.

Range of Experiment:- Coriollis Component of Acceleration can be determined at various speeds of rotation and water flow rates.

 

Service Required:
1.A.C. Single Phase .230 V. stabilized supply.
2.Floor Space -1.5 m X 1.5 m.



Additional Information:

  • Item Code: 1108
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Generation Of Involute Gear Tooth Profile

REQUEST CALLBACK

Generation Of Involute Gear Tooth Profile
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical

This board illustrates the process of cutting of involutes Gear Teeth, by use of rack type cutter It consists of 3 white acrylic discs A, B, C. having pitch circle diameter 450 mm, 300 mm & 200 mm respectively. A gear tooth profile with module 25mm can be traced out on a peace of paper placed between disc and cutter. An affect of Interference and Undercutting on correct profile of gear tooth can be studied from the profiles traced.



Additional Information:

  • Item Code: 1106
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Static Dynamic Balancing Apparatus

REQUEST CALLBACK

Static Dynamic Balancing Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 30,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical
PhaseSingle Phase

This equipment is designed for carrying out the experiment for balancing a rotation mass system. The apparatus consists of a stainless steel shaft fixed in a rectangular frame. A set of four blocks with a clamping arrangement is provided. For static balancing, each block is individually clamped on shaft and its relative weight is found out using cord and container system in terms of number of steel balls. For dynamic balancing, a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. The block are clamped on shaft is rotated by a motor to check dynamic balance of the system. The system is provided with angular and longitudinal scales and is suspended with chains for dynamic balancing.

 

EXPERIMENTS OF STATIC & DYNAMIC BALANCING APPARATUS:-

1. To balance the masses statically and dynamically of a single rotating mass system.
2. To observation of effect of unbalance in a rotating mass system.

  UTILITIES OF STATIC & DYNAMIC BALANCING APPARATUS:-Electricity 0.5 kW, 220 V, Single Phase TECHNICAL SPECIFICATION OF STATIC & DYNAMIC BALANCING APPARATUS:-

1. Drive Motor -- FHP Motor, variable speed, with speed controller
2. Balancing Weight -- 4 Nos. of Stainless Steel with different sized eccentric Mass for varying unbalance
3. Rotating Shaft -- Material Stainless Steel
4. The whole Set-up is well designed and arranged in a good quality painted Structure



Additional Information:

  • Item Code: 1100
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Motorized Gyroscope Apparatus

REQUEST CALLBACK

Motorized Gyroscope Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 40,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical
MaterialMild Steel
PhaseSingle Phase

The apparatus consists of a rotor mounted in bearings. This rotor is free to rotate about
(i) Its own axis i.e. axis of spin.
(ii) Axis of precession.
(iii) Axis of gyroscopic couple.

The rotor is connected to the variable speed motor. The weight of the motor is balanced by another weight, which is on either side of the rotor. By putting weights on the weight platform torque can be supplied to rotor, which is also called gyroscopic couple.

 

SPECIFICATIONS OF MOTORISED GYROSCOPE APPARATUS:

1.Rotor dia. 250mm free about 3 axis of rotation driven by variable speed motor.
2.Dimmerstat to control the motor speed.
3.Stopwatch to measure the angular speed about the axis of precession.
4.Weights – 0.2 kg, 0.5 kg and 1 kg.
5.A technical manual accompanies the unit.

 

SERVICES REQUIRE FOR MOTORISED GYROSCOPE APPARATUS:

1.220v stabilized AC supply with earthing connection.
2.Bench area – 0.5 x 0.5m at working height.
3.Tachometer for speed measurement (can be supplied at extra cost).



Additional Information:

  • Item Code: 1101
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Motorized Governor Apparatus

REQUEST CALLBACK

Motorized Governor Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 40,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical

The unit consists of a base upon which the bearing holders and driving motor are bearing can be fitted in a holders to end conditions for test shafts, viz. Both end fixed and one end free, one end fixed. A Variac provided control of driving motor. The unit demonstrates the phenomenon of whirling of shafts with single rotor. As the test is destructive, after the test cannot be used, hence the unit only demonstrates the principle.
However, results obtained are closer to theory, as compared to those with bare shafts. Also, It can be demonstrated that, after passing whirling speed, shaft again starts running true.

  SPECIFICATIONS OF MOTORISED GOVERNOR APPARATUS:

1.Test shaft – 4.75 mm, 6.35 mm and 7.9 mm – 2 each.
2.Bearing to provided end conditions, (a) Both ends fixed, (b) One end fixed and one end free.
3.Drive motor 1/8 HP, 1500 rpm with control arrangement.
4.The whole unit is mounted on a sturdy base.
5.Rotor for each shaft of suitable size.
6.A technical manual accompanies the unit.

  SERVICES REQUIRE FOR MOTORISED GOVERNOR APPARATUS:

Floor space area of 2m. X 1m. at working height.
230V, 15 A, AC electric supply connection.



Additional Information:

  • Item Code: 1102
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Whirling Of Shaft Apparatus

REQUEST CALLBACK

Whirling Of Shaft Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 50,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical

The unit consists of a main spindle driven by a variable speed motor. Three different governor assemblies can be mounted over the spindle. A with pointer measures the lift of the governor. Students can calculate characteristics of governor at and compare their performance viz. Sensitiveness, stability, governor effort etc.

  SPECIFICATIONS OF WHIRLING OF SHAFT APPARATUS:

1.Governor assemblies – Hartnell, porter & propel governor assembly one each with rotating weights.
2.Variable speed FHP D.C. motor to drive the main spindle.
3.Sliding weights for porter & proell governor.
4.Scale & a pointer to measure governor lift.
5.Spring & Spring compression adjustment arrangement.
6.A technical manual accompanies the unit.

  SERVICES REQUIRE FOR WHIRLING OF SHAFT APPARATUS:

1.230V, 5A, AC supply connection.

2.Bench area of 0. 75 x 1m. at working height.



Additional Information:

  • Item Code: 1103
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Cam Analysis Apparatus

REQUEST CALLBACK

Cam Analysis Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 40,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Use
Phase1 Phase
Power SourceAC230

The apparatus is designed to study the cam profiles and performance of cam and follower system. The apparatus consists of a shaft supported by ball bearings upon which three different types of cams can be mounted.
The push rod for follower is supported vertically, which can adopt three different types of followers. Cams and followers can be changed easily. A variable speed motor rotates the cam. A dial gauge permits plotting of follower displacement with respect to cam position. By operating the system at different Speeds, jump speed can be found and also the effect of weight and spring force on jump speed can be studied. Jump can be visualized also with the help of stroboscope (it is not supplied With the product).

  SPECIFICATIONS OF CAM ANALYSIS APPARATUS:

1.Cam -Eccentric, tangent and circular ARC type – one each.
2.Follower- mushroom, flat faced and roller type – one each.
3.Cams and followers are hardened to reduce wear of the surfaces.
4.Variable speed motor coupled to camshaft of suitable range and Variac.
5.A dial gauge to note the follower displacement.
6.A technical manual accompanies the equipment.

  SERVICES REQUIRE FOR CAM ANALYSIS APPARATUS:

1.230 V, A.C. stabilized supply along with earthing connection.
2.Bench area 0.5m x 0.5m x 0.5m height.
3.Tachometer to measure the jumping speed, (can be supplied extra)



Additional Information:

  • Item Code: 1104
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Epicyclic Gear Train Holding Torque Apparatus

REQUEST CALLBACK

Epicyclic Gear Train Holding Torque Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 85,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical

It is a motorized unit consisting of SUN gear mounted on input shaft. Two plane gears mesh with the annular gear. These planet gears are mounted on a common arm to which output shaft is fitted. Loading arrangement is provided for loading the system and to measure Holding Torque.

Specifications:
1. External type Epicyclic Gear Train:
  a. Bearing blocks for input & output shafts.
  b. A gear train with Holding drum and handle.
2. Internal Type Epicyclic Gear Train:
  a. A compact Gear Train.
  b. Variable speed D.C. Motor
  c. Rope brake arrangement to measure output torque and holding torque.
3 Control Panel comprising of
  a. Digital Ammeter and Voltmeter.
  b. RPM Indicator.
  c. Speed Controller.

Experimentation –
  1. To measure epicyclical gear ratio between Input shaft and Output shaft.
  2. To measure epicyclical gear ratio between Input shaft and holding drum.
  3. To measure Input torque, Holding torque and Output torque.

Service Required –
1. Floor Space – about 1.5m x 2m.
2. 230 V.AC stabilized power supply.



Additional Information:

  • Item Code: 1110
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Interference Undercutting

REQUEST CALLBACK

Interference Undercutting
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical

The board shows the demonstration of this phenomenon of Interference and Undercutting. When we rotate the teeth in anticlockwise direction, as the teeth is undercut is gives us a smooth working. When we give a rotation in clockwise direction, we can observe that the rack tip will be resisted by the tooth flank thus giving interference.



Additional Information:

  • Item Code: 1107
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
Yes! I am interested

Journal Bearing Apparatus

REQUEST CALLBACK

Journal Bearing Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 65,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical

The apparatus consists of a plain steel shaft encased in a bearing and directly driven by a small electric motor. The bearing is freely supported on the shaft and sealed at motor end. The motor speed is precisely controlled by control unit and sealed at motor end. The motor speed is precisely controlled by control unit and can be run in both directions. The bearing contains twelve equi-spaced pressures tapping around circumference and four along the axis. All are connected by light flexible plastic tube to the manometer so that the pressure head of all sixteen point can be observed at a time. The bearing can be loaded by attaching weight to the arm supported beneath it.

SPECIFICATIONS:

1. Journal : 50 mm. dia. (nominal)
2. Bearing : 55 mm. dia.
3. Weights : 4 adjustable weights
4. Motor : D.C. shunt Motor, 3,000 RPM.
5. Control panel : For speed control of Motor
6. Manometer panel : 16 tube Manometer
7. Oil recommended : SAE 10

EXPERIMENTS:

1. Observation of the pressure profile at various conditions of load and speed.
2. Plotting the Cartesian and polar pressure curves.
3. Plotting the theoretical Summerfield curves.

SERVICE REQUIRED:

1. Electric Connections : A.C Single Phase, 230v. supply with ear thing.
2. Stand Alone Space : 1.5m X 1.5m X 4m Height.



Additional Information:

  • Item Code: 1111
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Slip Creep Measurement Apparatus

REQUEST CALLBACK

Slip Creep Measurement Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 85,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory Practical

The apparatus consists of a variable speed D.C. Motor, Driving pulley and Driven pulley of equal diameter. The pulleys are mounted on input shaft (Motor shaft) and output shaft. The driven pulley can slide on the base with bearing block to change initial tension in belt. Brake drum is mounted on output shaft helps to measure power output. The motor speed is varied by dimmerstat. A two channel RPM Indicator is provided to measure speeds of driven and driving pulleys respectively.

Specifications:

1.D.C. Motor – 1 HP, 1500 RPM, variable speed.
2.Driving & Driven pulleys of equal diameters.
3.Brake drum along with spring balance.
4.Fiat Belt of fixed length of following materials –
(i)Fabric Belt
(ii)Canvas Belt.
(iii)Rubber Belt.
5.Belt tightening arrangement.
6.Speed Controller unit.
7.Two Channel digital RPM Indicator.
8.Stroboscope.

Experimentation –
1. To measure co-efficient of friction between pulley material and different belt materials.
2. To measure power transmitted with varied belt tensions and plotting graph of (T1 – T2).Tension Characteristics.
3. To measure percentage slip at fixed belt tension by varying load on brake drum and plot graph of (T1-T2) Vs. percentage slip. i.e. Slip Characteristics. Finding a creep zone from graph.
4. To measure belt slip speed and observe the limiting value float at constant speed when the slip just starts.

 

Service Required:

1.230 V.A.C. stabilized power supply
2.Space -. 1.5m x 1.5 m.



Additional Information:

  • Item Code: 1109
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

Vibration Lab

REQUEST CALLBACK

Vibration Lab
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1 Lakh / SetGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Set
Usage/ApplicationLaboratory Practical

The VIBLAB is designed to help in conducting various experiments to illustrate and verify the principles and relations involved in the study of vibrations.
This apparatus enables a comprehensive range of Vibration Experiments to be conducted on single basic framework. The frame is robustly constructed from channel section. The experiments are specially designed for quick and easy assembly on to the framework using a minimum amount of common engineering tools. To reduce changeover time on tube more advanced free and forced vibration experiments, large knurled knobs are used to clamp components on the frame and many components are common to several experiments.
All of the referenced groups of experiments are available separately making it possible to procure them individually & if required to build up a complete set over a period of time.

 

Specifications:

 

1.Wide range of experiments.
2.Forced and Free Vibrations.
3.Damped and undamped vibrations.
4.Arrangements for variation of damping.
5.Sturdy storage cabinet.
6.Experiments easily assembled.
7.Covers experiments for undergraduate studies.
8.Scope for student projects.

 

 

 

 

 

 

Features:

 

[I] Pendulum Experiments:
1.Simple Pendulum.
2.Compound Pendulum.
3.Bi-filler Suspension.

[II] Longitudinal Vibration Experiment.
1.Spring Mass System.
2.Eciuivalent Spring Mass study of undarrped
3.System free vibration

[III] Torsional Vibration Experiment.
1.Single Rotor System.
2.Two Rotor System.
3.Single Rotor with viscous darnping.

[IV] Damped Vibration Experiment.
1.Verification of Dukerleys Rule.
2.Forced rotor with viscous damping along with frictional HP Motor Strip chart recorder & control unit.
3.A technical manual accompanies the equipment.

 

Services required:

 

1.230 V, A.C. stabilized supply along with earthing connection.
2.Bench area 0.5m x 0.5m x 0.5m height.
3.Tachometer to measure the jumping speed, (can be supplied extra)



Additional Information:

  • Item Code: 1105
  • Production Capacity: 10
  • Delivery Time: 3-4 weeks
  • Packaging Details: Wooden Box
Yes! I am interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
DS Thakar (Proprietor)
Thakar Enterprises
Chintamani Nagar, Phase-3, Building No. A-9, Flat No. 22,Bibwewadi, Bibvewadi
Pune - 411037, Maharashtra, India
Call Us: 
Call Response Rate: 70%
Share Us :



Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

© Thakar Enterprises. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Thakar Enterprises